Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry.
Attaches rigging or signals crane operator to lift components to specified position.
Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles.
Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together.
Bolts or arc-welds structures and sections together. Positions drums and headers into supports or bolts or welds supports to frame.
Aligns water tubes, connects and expands ends to drums and headers using tube expander.
Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches
Performs minor maintenance or cleaning activities with tools and equipment.
Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers.
Signals crane operator in lifting parts to specific positions.
Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage.
Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts.
May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers.  
May line firebox with refractory brick and blocks.
May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed.
Flame cutting and knowledge of torch use.
Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Qualifications
3 + years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.
Must have a valid TWIC card

• Responsibilities
  Provide troubleshooting and client support via phone and email.
  Collaborate with team members and customers to drive GIS-related initiatives.
  Create, update, and maintain GIS asset and attribute data.
  Utilize CAD software to integrate GIS data with engineering designs.
  Manage GIS maps for both existing and new clients.
  Collect, analyze, and manage GIS data using Esri software.
  Implement GIS accounts and data systems for diverse projects.
  Develop data collection tools using Survey123 and Field Maps.
  Create data analysis and visualization tools using Experience Builder and ArcGIS Hub.

  Qualifications
  Bachelor’s degree in computer science, GIS,  or an IT related field from an appropriately accredited institution,
  OR
  Associate degree in computer science, GIS,  or an IT related field or related technical degree from an appropriately accredited institution and one year of experience in business application consulting or development,

  Strong communication skills, both written and verbal, with the ability to convey complex ideas clearly and effectively.
  Advanced skills in Microsoft 365 Products.
  Excellent attention to detail, ensuring high accuracy in data handling.
  Strong critical thinking and problem-solving skills.
  Self-motivated with a proactive approach to managing multiple tasks and priorities.
  Ability to collaborate effectively in a team-oriented environment.
  Strong organizational and time management skills, ensuring tasks are completed on time.
  In-depth knowledge of Esri products such as ArcGIS Pro, ArcGIS Online, Survey123, Field Maps, Experience Builder, and ArcGIS Hub.
  Proficiency in Python or related coding languages.
  Familiarity with CAD tools is a plus, enhancing the integration of spatial data with design projects.

Responsibilities

Monitor control panels to ensure that materials are being pumped at the correct pressure, density, rate, and concentration

Operate engines and pumps to shut off wells according to production schedules, and to switch flow of oil into storage tanks

Perform routine maintenance on equipment

Repair gas and oil meters and gauges

Unload and assemble pipes and pumping equipment, using hand tools

Attach pumps and hoses to wellheads

Start compressor engines and divert oil from storage tanks into compressor units and auxiliary equipment to recover natural gas from oil

Open valves to return compressed gas to bottoms of specified wells to re-pressurize them and force oil to surface

Supervise oil pumpers and other workers engaged in producing oil from wells

Qualifications

Always were appropriate PPE (FRC, hard hat, steel toed shoes/boots, safety glasses and hearing protection)
Drive appropriately for the conditions, always wear seat belt, do not use phones in any way while operating a vehicle
Follow lock-out/tag-out procedures when opening any piping or working on equipment including electronics
Follow call-out procedures when on call
Ensure contract workers in your area are wearing PPE and working in a safe manner. Implement stop work authority as needed
Report environmental spills immediately and erosion as it is found
Routinely check and maintain all mechanical equipment (ATVs, water pumps, maxi heaters, etc.)
 
Other responsibilities as assigned
Basic computer skills (excel, word, outlook)
Ability to understand gauges, dials, or other indicators to ensure equipment is working properly
Ability to perform routine maintenance on machines and equipment
Ability to identify and fix most issues with limited or no direction
Must have a good driving record and a valid driver’s license
Must be able to pass the pre-employment drug screen and background check

As a Gas Turbine Mechanic, you are demonstrating strong technical capabilities and hands on expertise in the overhaul and repair of gas turbine units. You are utilizing mechanical aptitude to interpret complex assembly drawings and perform precision measurements. You are working collaboratively under time-sensitive conditions to complete inspection, repair, and assembly tasks. You are supporting on site activities when required and contributing to safety and quality excellence across all operations.

As a Gas Turbine Mechanic, you are being responsible for:

Demonstrating familiarity with hand, pneumatic, and hydraulic tooling
Accurately using precision measuring equipment such as ID/OD micrometers, depth gauges, and calipers
Possessing strong mechanical aptitude to independently understand and apply complex machining or assembly drawings
Working as a team member to follow detailed work routers for inspection and repair of turbine units and rotating equipment under time constraints
Providing onsite support as needed based on operational requirements

To be successful in this role you will:

Have a High School Diploma or equivalent
Have a minimum 5 years of overhaul and repair experience in at least one of the following: GE10, PGT10/PGT25, Frame 3, Frame 5
Have flexibility to work both 1st and 2nd shifts
Have strong knowledge of HSE requirements and ability to follow and update safety policies and procedures

Responsibilities
Visually inspect various topside and subsea oil and gas industry components both on and offshore, under the direct supervision of an Inspection Operations Lead or Project Manager
Carry out offshore inspection campaigns for three or more weeks at a time.
Generate inspection reports congruent with client requests and applicable codes and standards.
Learn and utilize NEXUS IC or equivalent software and hardware, computer-based data management system including hardware, software and troubleshooting.
Be able to conduct a clear and concise, live video commentary during inspection campaigns
Assist with the mobilization and demobilization of inspection equipment.
Assist in preparing work packs and database generation for offshore inspection campaigns and complete the review of video and reports post campaign.

Qualifications
Minimum of five years’ experience conducting inspection campaigns of either subsea components or onshore equipment
Minimum of three years hands on experience with subsea oil and gas components and their basic operations CSWIP 3.3U / 3.4U underwater inspection qualification is preferred.
Must have knowledge and experience with traditional NDE methodologies (UT, MT, etc.) Strong knowledge of PC hardware / software networking is preferred.
Excellent communication skills (written and spoken) in English; additional languages an asset.
Willing and available to work offshore for 3 or more weeks at a time to complete inspection campaigns.
Must have (or be able to obtain within 14 days) offshore Health, Safety Security, Environmental and Assurance (HSSEA) requirements, such as: Offshore physical, BOSIET / HUET, TWIC, etc.
Physically capable of lifting 50lbs or more to assist in the mobilization and demobilization of campaigns Must pass a background check and DOT drug screening.

Responsibilities
Reads and interprets blueprints, layout plans, vendor installation and operation manuals, and other schematic drawings to determine work procedures.
Dismantles machines using hammers, wrenches, crowbars and other hand tools.
Moves machinery and equipment using hoists, dollies, rollers and trucks.
Assembles and installs equipment, such as shaffing, conveyors and tram rails, using cranes, hand tools and power tools.
Constructs foundation for machines using hand tools and building materials, such as wood, cement and steel.
Aligns machines and equipment using hoists, jacks, hand tools, squares, rules, micrometers and plumb bobs.
Must have knowledge of optical and laser alignments.
Assembles machines and bolts, welds, rivets or otherwise fastens them to foundation or other structures using hand tools and power tools.
May operate engine lathe to grind, file and turn machine parts to dimensional specifications.
May install robot and modify its program using teach pendant.
May use transit and level for equipment setting.
Loads, transports and unloads materials, tools, equipment and supplies.
Performs lubricating maintenance, cleaning activities, or repair of tools, machines, and equipment.
Responsible for observing and complying with all safety and project rules. Performs other duties as required.
Use effective verbal and written communication skills.
Be capable of listening and communicating with other supervision and employees.
Be motivated and work safely and productively.
Understand and respond accordingly to all safety alerts, warnings, hazards, etc.

Qualifications
May be required to lift and carry items weighing no more than 50 pounds.
Must possess enough strength and stamina to perform the technical duties and essential functions as identified above.
Must be able to move in and around confined and uneven areas.
Must have full range of motion consistent with age.
May be required consistently to work 12 hour shifts performing construction based labor in varying temperature extremes and conditions.
May be required, on occasion, to work up to 16 hours in a single shift.
Must be able to climb and maintain balance on stairs, ladders, scaffolds and steel framework.
Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms, and other job related noises.
Visual acuity, depth perception and color discrimination consistent with that required to work at heights and on uneven surfaces.
Must be able to perform the following actions to the frequency stated:

Sandblasting pipe and skids in different configurations using a 2” high pressure hose; Air helmet will be provided
Painting pipe and metal buildings and skids.
Must have experience with 2-part epoxy based paints and other acrylic 2-part paints using respirator and PPE
Follow the rules of safe conduct at all times.
Identify, recognize and demonstrate safe usage of hand tools and power tools appropriate for the job,
Recognize various materials used in the craft and demonstrate a working knowledge of appropriate material handling techniques.
Select and safely use appropriate equipment which may include (but not limited to) manlifts, fork lifts, and company trucks.

Qualifications
The employee must possess a minimum reasoning ability usually associated with this type of work.
Extent Flexibility – The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
Multi-limb Coordination – The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
Manual Dexterity – The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
Trunk Strength – The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without ‘giving out’ or fatiguing.
Gross Body Equilibrium – The ability to keep or regain your body balance or stay upright when in an unstable position.
Arm-Hand Steadiness – The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
Must be able to pass pre-employment drug, background and fit tests.

Responsibilities and Duties:

Establish, implement and maintain a Quality Assurance Program to manage, control, document and ensure that all work complies with the requirements of contract documents
Manage on-site, full-time Quality Staff
Review submittals (product data, shop drawings, etc.) for compliance with contract documents
Verify all material and equipment meet specified quality and contractual requirements and are received, handled, and stored correctly.
Coordinate Subcontractors and Suppliers work to certify appropriate quality programs are followed
Schedule special inspections as required
Accompany personnel for off-site inspections and testing
Develop and implement Inspection and Testing Plans to produce objective evidence that structures, systems, components or services meet the requirements of the contract documents
Plan, manage, perform, record and follow up as needed on all required inspections and tests
Establish and maintain construction process controls to ensure work complies with contract documents and is performed by qualified personnel
Maintain measuring and testing equipment including proper storage, identification, and calibration
Identify all nonconformities, including those entered on the Daily Quality Reports, and document in a Nonconforming Report (NCR) and a Log, to identify, correct, document and control them
Perform root cause analysis to preclude repeated failures resulting from the same or similar cases and recommend corrective action
Identify all types of quality records (submittals, procedures, QWPs, etc.) as evidence that all activities comply with the requirements
Perform internal audits to assess compliance with the requirements of the Quality Assurance Program and contract documents
Perform other duties as required

Qualifications
Qualifications and Skills:

Five years of quality-related experience
Prior experience in Construction QAQC related functions
Strong oral and written communication
Excellent time management skills
Proficient in Microsoft Office Suite

Responsibilities
• Validate inspection requirements and carry out inspection activities at worksites including suppliers, warehouses, etc
• Witness/review of testing activities in compliance with Inspection and test plan requirements
• Verification that appropriate approvals are in place prior to commencement of specific works (e.g. weld procedures are approved, welder certification, etc.)
• Review and endorsement of quality records raised as an output from manufacturing and installation processes.
• Generation of inspection and progress reports as required.
• Final inspection release and issue of inspection release notes
• Report any inspection deficiencies and queries to the project quality team
• Verification that inspection test equipment is fit for purpose and calibrated prior to us
• Verification of equipment storage and preservation in line with manufacturer’s recommendations
• Provide support to as-building processes and handover for completions.
• Assist in auditing of suppliers as required

Qualifications
• Degree/diploma or local equivalent in quality or technical discipline (desirable)
• Inspection certificate in a relevant discipline (e.g. welding/electrical/mechanical) from a recognized
industry or national body (essential)
• Radiographic interpretation certificate (piping welding inspectors only – desirable)
• Quality auditor qualification by a recognized industry body (desirable)
Knowledge, skills, and experience:
• 5 + years relevant experience (Preferably in the associated industry).
• Awareness of ISO 9001 requirements
• Proficient in Microsoft Office
• High level of communication skills in both written and spoken format
Personal attributes:
• Good planner and organizer
• Attention to detail
• Integrity and trustworthy

Responsibilities
Civil / Structural Asset Strategy & Reliability

Develop, implement, and continuously improve the civil and infrastructure life cycle management and capital replacement strategy, including structures, foundations, pipe racks, roads, drainage, containment systems, buildings, and underground utilities
Establish asset condition assessment programs (inspections, risk ranking, and degradation mechanisms) to prioritize maintenance, repair, and replacement activities
Define long-term capital needs, risk mitigation plans, and life cycle cost optimization strategies for civil and structural assets
Provide technical leadership in identifying “bad actor” assets and developing corrective and preventive solutions
Collaborate with Reliability and Maintenance teams to integrate civil assets into site asset health monitoring and reliability programs
Project Engineering & Execution

Serve as Project Engineer for civil/structural capital and expense projects, from scope development through design, construction, and closeout
Develop project scopes, cost estimates, schedules, and execution strategies in alignment with site capital governance
Lead design-based development and technical reviews; ensure constructability, maintainability, and long-term asset integrity
Coordinate with internal Project Management, external engineering firms, and construction contractors to ensure safe and high-quality execution
Provide field support during construction, including issue resolution, design clarifications, QA/QC oversight, and turnover support
Engineering Standards, Codes & Compliance

Serve as the global technical authority for civil and structural engineering standards, specifications, and best practices
Ensure compliance with applicable codes and regulations (ACI, AISC, ASCE, IBC, OSHA, FEMA, local jurisdiction requirements, and company standards)
Support site audits, inspections, and regulatory inquiries related to civil and structural assets
Participate in Process Hazard Analyses (PHA), Management of Change (MOC), and incident investigations where civil or structural risks are involved
Safety & Risk Management

Embed safety into all phases of engineering, design, and construction execution
Identify and mitigate civil and structural risks that could impact personnel safety, environmental performance, or business continuity
Act as a visible safety leader for both plant and contractor engineering and construction activities
Cross Functional Collaboration & Technical Leadership

Partner with Operations and Maintenance to align asset strategies with operating needs and production risks
Provide mentorship and technical guidance to engineers, designers, and inspectors
Act as a key technical advisor to site leadership on infrastructure risk, capital planning, and long-term site sustainability


Qualifications
A Bachelor’s degree in Civil or Structural Engineering
20+ years of progressive experience in industrial manufacturing, chemical, petrochemical, refining, or heavy industrial environments
Strong background in structural steel, concrete, foundations, and industrial infrastructure systems
Experience developing life cycle management strategies and capital replacement roadmaps for civil assets
Knowledge of inspection methodologies, degradation mechanisms, and repair techniques for aging infrastructure
Familiarity with engineering contractors, construction practices, and field execution challenges
Strong analytical and problem-solving skills with the ability to balance risk, cost, and operability
Effective communicator able to translate technical issues into business focused recommendations
Proven ability to influence cross functional teams without direct authority
High standards for safety, quality, and technical rigor
Continuous improvement mindset with a strong sense of ownership for asset integrity

Job Description
Selects type and size of pipe or other related materials and equipment according to specifications.
Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques.
May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes.
Lays out, positions, aligns and fits components together in various body positions.
Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together.
Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor.
Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun.
Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy.

Qualifications
Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. Capable of producing welds that will meet NDE (non destructive examination) requirements      

Responsibilities
Be willing to assist roustabouts and other co-workers in all aspects of work as needed
Conduct housekeeping duties at the job site, on company vehicle and equipment. Work with hands to keep the equipment maintained and clean
Complete daily invoices
This position will provide support on day-to-day project needs
Learn and follow safety regulations;
Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects
Other duties as assigned
Work with hands to keep the equipment maintained and clean;
Ability to perform basic maintenance on oilfield infrastructure and gas fields using the proper tools;
Complete housekeeping duties at the job site, company vehicle and equipment;
Willing to work in all weather condition;
Other duties as assigned.

Qualifications
Valid driver’s license and clean driving record
Commercial driver’s license or ability to obtain a CDL
Basic computer skills
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
Must be able to pass a pre-employment drug screen, fit test and background check.

Responsibilities

Engage with stake holders to define the scope, execution strategy, and estimate the Total Installed Cost of the project.
Ensure that clear and complete scopes, schedules, and budgets are prepared and accepted by the client for assigned projects.
Work with stakeholders to define the project economics and payback.
Develop and document an execution plan for each project which is scaled to the size and complexity of that project.
Develop accurate scopes, schedules, and estimates for each of your projects.
Prepare Appropriations Request documents for corporate capital funds.
Assemble a team of qualified personnel, of various disciplines, to execute the project.
Provide guidance to the project team to accomplish the scope of work and achieve project goals, schedule milestones and cost & quality objectives.
Work directly with procurement and other resources to ensure that contracts, equipment, supplies, and services needed to execute your projects are put in place and managed.
Perform engineering reviews and project engineering to support your projects and the projects of others as required.
Work with on-site and off-site resources to accomplish the scope of work effectively during the project.
Promptly recognize, document, and communicate any scope, schedule, budget, or design changes and secure client authorization prior to allowing changes.
Communicate regularly to keep team members and stakeholders up to date on project status, schedule progression, costs, and other critical or contractual items.
Ensure the accuracy and completeness of all deliverables and services provided by the project.
Work with Maintenance and Operations during the commissioning and start-up phase.
Create new and update existing documentation for equipment and systems installed or modified as part of your projects.
Complete all needed Pre-startup Safety Reviews, change management processes, and project closeout for your projects.

Qualifications
 
Candidate must have a Bachelor of Science degree in Engineering, with a minimum of 10 years of industry related experience working as a Project Manager.
Candidates must have actual manufacturing plant experience and have supported at least on turnaround or extended outage.
Candidates must be willing and capable of working extended hours or weekends (infrequently) as needed to support plant outages and tight deadline projects.
Demonstrated knowledge of successful project management practices such as development of scope, schedule, and estimate and subsequent project cost controls and forecasting.
Knowledge of chemical or related manufacturing facilities and experience managing projects in these facilities.
Able to proactively plan, organize, and drive projects from inception to start up and completion.
Ability to work in and foster a strong team environment with minimal supervision.
Strong safety champion who will lead the project in achieving zero incidents and injuries.
A proactive approach to solving problems and getting the job done.
Self-motivated/Self-directed.
Able to handle multiple activities simultaneously.
Excellent written and verbal communication skills.
Demonstrated knowledge of gated work process for project management and experience managing projects using a gated process.
Good negotiation and meeting facilitation skills.
Good working knowledge of the procurement process.
Knowledge of current versions of industry standard codes, practices, and procedures and their application.
Proficient in the use of Microsoft Word, Excel and Outlook.
Good communication skills, both verbal and written.
Good presentation skills.